Parts For 662912824263771 - AppliancePartsPros.com (2024)

QuantityAdd to Cart

The Lower Dishrack Wheel Assembly is an OEM replacement part for Whirlpool dishwashers, designed to ensure the smooth and easy movement of the lower dishrack in and out of the dishwasher. This assembly includes the wheel and the mount that attaches to the dishrack, allowing effortless gliding even when the rack is fully loaded with dishes.

Symptoms of a failing Lower Dishrack Wheel Assembly include:

• The dishrack sticking or struggling to slide in and out
• A wheel breaking off or becoming damaged, leading to uneven movement
• Noise during dishrack movement, indicating wear or damage to the wheels

Causes of a bad Lower Dishrack Wheel Assembly can range from normal wear and tear, which can lead to the degradation of the wheel material or the loosening of the mount, to overloading the dishrack, which puts excess pressure on the wheels and their attachments. Additionally, the accumulation of detergent or mineral deposits from hard water can also affect the wheel's operation.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Do-It-Yourself Stories from Customers like You Wheels were broken on kitchenaideJason D. • Frisco, TX • May 11, 2017

I ordered 4 of this part from AppliancePartsPros.com and watched the repair video of the product. This was a simple repair that took 10 minutes to replace all 4 wheel units on the bottom rack. Product is exact match to the part I replaced. Read more

QuantityAdd to Cart

The Dishwasher Rack Stop Clip is an OEM replacement part for Whirlpool dishwashers. This small but essential component plays a crucial role in ensuring the smooth and secure operation of the dishwasher racks.

Symptoms of needing to replace the dishwasher rack stop clip include:

• Racks rolling out unexpectedly when opening the dishwasher door
• Racks becoming misaligned or sliding out of their tracks
• Difficulty in loading or unloading dishes due to unstable rack positioning

Causes of a faulty rack stop clip can include normal wear and tear over time, accidental impact or damage, or improper installation.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dishwasher models.

Do-It-Yourself Stories from Customers like You Dishwasher would not discharge waterJohn S. • Lebanon, NJ • August 15, 2015

My discharge would not empty after a wash cycle and I always had gross gray water left in the bottom approx 3" deep?After doing the obvious things of checking the simp for garbage, and checking that the discharge hose wasn't blocked, I removed my discharge pump ( not too hard to do) and tested. My pump which did run and turn the impeller. However, the pump evidently had weakened with time and weakened and could no longer pump the waste water up hill to the "T" connection under the sink. A... Read more

QuantityAdd to Cart

This adjuster kit is an OEM replacement part for Whirlpool dishwashers. Constructed of durable gray plastic and metal, this kit measures approximately 12 inches wide and 6.5 inches tall.

Symptoms of needing an Adjuster Kit include:

• Excessive vibrations or shaking during operation
• The appliance appearing unlevel or tilted
• Difficulty in opening or closing doors or drawers
• Increased noise levels or banging sounds

Causes of a bad or worn-out adjuster kit can include normal wear and tear over time, accidental impacts or mishandling, or improper installation or leveling during the initial setup.

This Kit Includes:

• (2) adjuster arms
• (2) adjuster actuators
• (2) gray adjuster covers
• (2) gray adjuster housings
• (4) screws
• Instruction sheet

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Top rack rollers snapped off plastic axles snappedRobin J. • Hudson, WI • July 15, 2014

I replaced the adjusters on both sides (since two rollers broke off on one and one broke off on the other). Replacement was easy, just remember to keep the clips from the original adjusters. Take the clips off, remove the adjuster, replace with the new adjuster, and replace the clips. The new adjuster comes with the rollers already attached so no need to keep the ones from when plastic axle broke on the original adjusters. Read more

QuantityAdd to Cart

The Dishwasher Heating Element is an OEM replacement part for Whirlpool dishwashers. It is a vital heating component that raises water temperatures sufficiently for sanitizing dishes during hot rinse cycles. Proper heat is essential to drying fully.

Causes of a bad heating element can include scaling or mineral deposition over time that insulates it from conducting heat. Physical damage like burnouts or breaks in coils/wires are also possible.

Symptoms of a faulty element are:

• Dishes failing to get fully dry at the end of cycles
• Low wash water temperatures
• Buzzing, clicking or strange noises from under the dishwasher

With a screwdriver and wrench set, you can replace the heating element yourself. Before you replace it, make sure to disconnect your power source. Once that's done, pull out your dishwasher. Then, disconnect the wires and use a wrench to remove the old element before installing the new one. Finally, slide the dishwasher back into its original location and reconnect the power!

This part fixes the following symptoms

• Not drying dishes properly
• Not cleaning dishes properly

See more...

Do-It-Yourself Stories from Customers like You Whirlpool dishwasher not fully cleaning or drying dishes.Andrew M. • Seattle, WA • January 05, 2020

My Whirlpool dishwasher (wdf520padm3) started leaving food on dishes and not drying dishes as well as it used to, even when I ran the 'high temp' and 'heavy' cleaning options. This started happening after about 3 years of operation. To try to diagnose the issue, I started the diagnostics cycle (see below for instructions on how to do this). However, the 'Clean' LED is also not working on my dishwasher, so I was unable to read the error code after the service cycle finished. I decided to... Read more

QuantityAdd to Cart

The Lower Door Seal is an OEM replacement part for Whirlpool refrigerators. It plays a crucial role in maintaining the proper seal between the refrigerator door and the cabinet, ensuring energy efficiency and consistent temperature control.

Causes of needing to replace the lower door seal can include normal wear and tear over time, exposure to extreme temperatures or UV light, or physical damage due to impact or mishandling.

Symptoms of a faulty lower door seal include:

• Difficulty in closing the refrigerator door properly
• Visible gaps or gaps around the door seal area
• Condensation buildup or frost formation around the door seal
• Increased energy consumption due to inefficient sealing

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerator models.

Do-It-Yourself Stories from Customers like You Dishwasher needed a new bottom door sealDaniel F. • Englewood, FL • April 03, 2016

Thanks to Jason and his tech people at Appliance Parts Pro, I was able to remove and replace the seal and eliminate all leaks at the bottom of the door. I have a Kitchenaide (Whirlpool) dishwasher model KUDC10IXBL1. Here is how to replace the bottom door seal.1) Shut off breaker to dishwasher on the electrical panel.2) Open the dishwasher door completely, and while supporting the door, remove the hex head screws that hold the outside cover.2) Close the door carefully and slip the outside... Read more

QuantityAdd to Cart

The Door Balance Link Kit is an OEM replacement part for Whirlpool dishwashers. This kit includes the necessary components to ensure proper balancing and operation of the dishwasher door.

Causes of needing to replace the door balance link kit include wear and tear over time, damage due to mishandling or impact, or issues with the door hinges or springs.

Symptoms that may indicate the need for a new door balance link kit include:

• The dishwasher door feeling loose or unstable
• Difficulty in opening or closing the door smoothly
• The door failing to stay in the desired position when opened

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dishwasher models.

This part fixes the following symptoms

• Noisy
• Door won't close
• Door latch failure

See more...

Do-It-Yourself Stories from Customers like You The door would free fall to the floor left door balance brokenDaniel M. • San Diego, CA • December 23, 2016

I finally decided to repair my dishwasher because the door would free fall to the floor possibly breaking the hinges. Also the top shelf was rolling out on its own every time the door was opened. I first pulled the dishwasher out of the enclosure and found that the drain hose was directly under the pump area throwing the unit completely out of level. Also the inadequate plastic and rope counterbalance on the left side was completely broken where the rope was attached to the plastic piece to the... Read more

QuantityAdd to Cart

The Dishrack Stop Clip is an OEM component specifically designed for Whirlpool dishwashers. This single clip works to secure the lower dishrack in its correct position during the wash cycle.

Symptoms of a bad dishrack stop clip can include:

• The lower dishrack rattling or moving excessively during spinning
• Dishes and utensils falling to the bottom of the tub and not getting clean
• Visible wear on the clip material

Causes can be normal wear from securing the dishrack cycle after cycle. Improper loading may also damage the clip over time.

This OEM Whirlpool part replacement is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dishwashers.

Do-It-Yourself Stories from Customers like You Top rack of dishwasher was falling down when pulled outJoanne P. • Andover, MA • October 13, 2014

Replaced wheel assembly because prongs were broken and replaced track because wheel assemblies were rolling out from the track when extended. Read more

QuantityAdd to Cart

The Drain Pump is an OEM part for Whirlpool dishwashers. It is responsible for removing wastewater from the dishwasher tub during the drain cycle, ensuring that the dishwasher operates efficiently and effectively.

Causes of a bad drain pump can include clogging from food particles and debris, damage to the pump impeller, or electrical failures within the pump motor. Over time, regular use can lead to wear and tear that affects the pump's performance.

Symptoms of a bad drain pump include:

• Water not draining from the dishwasher
• Standing water at the bottom of the dishwasher after a cycle
• Unusual noises during the drain cycle
• Error codes related to drainage issues

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

• Will not drain

See more...

Do-It-Yourself Stories from Customers like You Dishwasher stopped draining water the pump was running (i could hear the noise) but water would not go awayEvgueni P. • San Mateo, CA • February 08, 2015

I've opened sump housing to check for clogging but it was clean. When I removed check valve to inspect it I've found out that the round part of the valve was missing so I figured it might've blocked the water exit at drain hose or something like that. So I pulled the dishwasher out to get a full access to drain hose connector and the pump. Upon disconnecting the drain and checking its connector I indeed found the round piece totally blocking the hose and acting as a seal. I removed the piece... Read more

QuantityAdd to Cart

The Gasket and Strike Kit is an OEM part for Whirlpool dishwashers, designed to ensure a tight and leak-proof seal around the dishwasher door. This kit includes a door gasket and a door strike, both crucial components in preventing water from leaking out during the wash cycle.

Causes of a bad Gasket and Strike Kit can include normal wear and tear from regular use, leading to a loss of elasticity in the gasket.

Symptoms of a bad Gasket and Strike Kit include:

• Water leaking from around the dishwasher door.
• Difficulty closing the dishwasher door or ensuring it stays latched during operation.
• Visible signs of wear, such as cracks or hardening on the gasket, or bending or damage to the strike.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms

• Leaking

See more...

Do-It-Yourself Stories from Customers like You Leaking door gasketScott N. • Myrtle Beach, SC • July 04, 2014

I followed your step by step instructional online video. That is one great tool you are providing for your customers! Read more

QuantityAdd to Cart

• Dishwasher not filling with water
• Water filling too slowly or too quickly
• Water leaking from the dishwasher
• Unusual noises during the fill cycle

This part fixes the following symptoms

• Will not fill with water

See more...

Do-It-Yourself Stories from Customers like You No water in the dishwasher.Rohan P. • Troy, OH • January 30, 2022

As mentioned, our Whirlpool Dishwasher would complete the cycle but Tablet pretty much sat in the Soap Dispenser Box nor there was any sign of water inside the Dishwasher. This happened 2 - 3 times. Hence decided to dive into what the fix was.After reviewing a bunch of Youtube Videos, understood first how a typical Dishwasher operates and what are the basic checks it does before water is let inside. So it typically first checks whether Door S/w got activated, followed by Float Switch... Read more